TM 1-1520-238-23
11-442
11.100. LATERAL F.S. 132.84 BELLCRANK REMOVAL/INSTALLATION – continued
b. Install rods (13) and (12) on bellcrank (6).
Torque nut (15) 30 to 40 INCH-POUNDS.
(1) Aline rod (13) with bellcrank (6).
(2) Install bushing (19).
(3) Aline rod (12) with bellcrank (6).
(4) Install bolt (16) through washer (17), bushing
(18), bellcrank (6), rod (12), bushing (19), and
rod (13).
(5) Check fit of self-retaining bolt (16) (para
11.1).
(6) Install nut (15). Torque nut (15) to 30 INCH-
POUNDS. Use torque wrench.
(7) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(8) Install new cotter pin (14).
c. Install rod (5) on bellcrank (6). Torque nut (8) 30
to 40 INCH-POUNDS.
(1) Aline rod (5) with bellcrank (6).
(2) Install bolt (9) through washer (10), bushing
(11), bellcrank (6), and rod (5).
(3) Check fit of self-retaining bolt (9) (para 11.1).
(4) Install nut (8). Torque nut (8) to 30 INCH-
POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(6) Install new cotter pin (7).
d. Inspect (QA).
GO TO NEXT PAGE
12
18
16
13
17
15
19
14
6
M04-4367-8
6
9
M04-4367-9
7
8
11
10
5
