TM 1-1520-238-23
11-459
11.104. LATERAL F.S. 159.13 BELLCRANK BRACKET ASSEMBLY REMOVAL/INSTALLATION – continued
11.104.3. Removal
a. Remove access cover (1) from pilot cockpit
aft bulkhead (2).
(1) Remove screw (3), washer (4), clamp (5)
spacer (6), and clamp (7) from bulkhead (2).
(2) Move wire harnesses (8) and (9) away from
bulkhead (2).
(3) Move thermal insulation (10) away from bulk-
head (2) to expose cover (1).
(4) Remove 18 screws (11) and washers (12).
(5) Remove cover (1).
b. Remove push-pull rod (13) from bellcrank
bracket assembly (14).
(1) Remove and discard cotter pin (15).
(2) Remove nut (16).
(3) Remove bolt (17), washer (18), and bushing
(19).
(4) Remove rod (13).
c. Remove bellcrank (14) from bracket (20).
(1) Remove and discard cotter pin (21).
(2) Remove nut (22).
(3) Remove bolt (23), washer (24), and bushing
(25) from bracket (20) and bellcrank (14).
(4) Remove bellcrank (14).
GO TO NEXT PAGE
M04-4398-2
5
6
7
8
3
4
9
2
M04-4398-3
1112
1
2
10
17
18
19
16
13
14
M04-4398-4
15
23
24
25
20
14
M04-4398-5
22
21
