TM 1-1520-238-23
11-454
11.103. LATERAL F.S. 159.13 PUSH-PULL ROD ASSEMBLY REMOVAL/INSTALLATION
11.103.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
11.103.2. Initial Setup
Tools:
Aircraft mechanic’s tool kit (item 376, App H)
10 - 50 inch-pound 1/4-inch drive click type torque
wrench (item 434, App H)
Materials/Parts:
Cotter pin (2)
Personnel Required:
67R
Attack Helicopter Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
References:
TM 1-1520-238-T
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
2.2
Access panel L200 removed
2.161
Pilot seat removed
13.27
Air duct No. 11 removed
WARNING
To prevent injury, maintenance per-
sonnel shall be warned before moving
controls. If injury occurs, seek medi-
cal aid.
11.103.3. Removal
a. Remove access panel (1) from pilot cockpit aft
bulkhead (2).
(1) Remove screw (3), washer (4), clamp (5),
spacer (6), and clamp (7) from bulkhead (2).
(2) Move wire harnesses (8) and (9) away from
bulkhead (2).
GO TO NEXT PAGE
PILOT STATION
M04-4379-1
M04-4379-2
5
6
7
8
3
4
9
2
