TM 1-1520-238-23
11-598
11.135. COLLECTIVE F.S. 161.54 BRACKET ASSEMBLY REMOVAL/INSTALLATION – continued
b. Remove access covers (1) and (2) from pilot
cockpit aft bulkhead (3).
(1) Move thermal insulation (4) away from bulk-
head (3) to expose covers (1) and (2).
(2) Remove 18 screws (5) and washers (6) from
cover (1).
(3) Remove cover (1).
(4) Remove 20 screws (7) and washers (8) from
cover (2).
(5) Remove cover (2).
c. Remove push-pull rod (9) from bellcrank
bracket assembly (10).
(1) Remove and discard cotter pin (11).
(2) Remove nut (12).
(3) Remove bolt (13), washer (14), and bushing
(15).
(4) Remove rod (9).
d. Remove bellcrank (10) from bracket (16).
(1) Remove and discard cotter pin (17).
(2) Remove nut (18).
(3) Remove bolt (19), washer (20), and bushing
(21).
(4) Remove bellcrank (10).
GO TO NEXT PAGE
7
M04-5068-2
4
2
1
5
6
8
3
M04-5068-3
10
1514
13
9
12
11
M04-5068-4
10
19
20
21
16
18
17
M04-5068-5
