TM 1-1520-238-23
11-603
11.136. COLLECTIVE F.S. 161.54 PUSH-PULL ROD ASSEMBLY REMOVAL/INSTALLATION – continued
11.136.3. Removal
a. Remove access cover (1) from pilot cockpit
aft bulkhead (2).
(1) Remove screw (3), washer (4), clamp (5),
spacer (6), and clamp (7) from bulkhead (2).
(2) Move wire harnesses (8) and (9) away from
bulkhead (2).
(3) Move thermal insulation (10) away from bulk-
head (2), to expose cover (1).
(4) Remove 19 screws (11) and washers (12).
(5) Remove cover (1).
b. Remove push-pull rod end (13) from bellcrank
(14).
(1) Remove and discard cotter pin (15).
(2) Remove nut (16).
(3) Remove bolt (17), washer (18), and bushing
(19).
(4) Remove rod (13) from bellcrank (14).
GO TO NEXT PAGE
M04-5090-2
5
6
7
8
3
4
9
2
M04-5090-3
10
1112
1
2
14
17
16
18
19
15
M04-5090-4
13
