TM 1-1520-238-23
11-629
11.141.
COLLECTIVE F.S. 164.95 PUSH-PULL ROD ASSEMBLY REMOVAL/INSTALLATION – continued
b. Install rod (6) on bellcrank (7). Torque nut (9) 30
to 40 INCH-POUNDS.
(1) Aline rod (6) with bellcrank (7).
(2) Install bolt (10) through washer (11), bushing
(12), bellcrank (7), and rod (6).
(3) Check fit of self-retaining bolt (10) (para
11.1).
(4) Install nut (9). Torque nut (9) to 30 INCH-
POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(6) Install new cotter pin (8).
c. Inspect (QA).
d. Remove -3 rig pin (4) from pilot collective
stick (1).
e. Remove flag (5) from stick (1).
f. Install transformer-rectifier No. 2 (para 9.32).
g. Perform collective flight control rigging main-
tenance operational check (TM 1-1520-238-T).
h. Install collective stick cover (para 2.2).
END OF TASK
7
8
9
10
11
12
M04-4373-5
6
M04-4373-6
1
5
3
4
