TM 1-1520-238-23
11-832
11.189. LONGITUDINAL MAGNETIC BRAKE SPRING MECHANISM DISASSEMBLY/ASSEMBLY
(AVIM) – continued
b. Install bellcrank (2) on housing (9). Torque nut
(11) 30 to 40 INCH-POUNDS.
(1) Aline bellcrank (2) with housing (9).
(2) Install bolt (12) through washer (13), bushing
(14), housing (9), and bellcrank (2).
(3) Check fit of self-retaining bolt (12) (para
11.1).
(4) Install nut (11). Torque nut (11) to 30 INCH-
POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(6) Install new cotter pin (10).
c. Install link (1) on bellcrank (2) and lever (3).
Torque two nuts (5) 30 to 40 INCH-POUNDS.
(1) Aline link (1) with bellcrank (2) and lever (3).
(2) Install two bolts (6), washers (7), and bush-
ings (8).
(3) Check fit of self-retaining bolts (6) (para 11.1).
(4) Install two nuts (5). Torque two nuts (5) to 30
INCH-POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(6) Install two new cotter pins (4).
d. Inspect (QA).
END OF TASK
M04-4421-8
12
13
14
11
9
2
10
M04-4421-9
5
4
1
4
5
8
7
6
3
8
7
6
2
