TM 1-1520-238-23
11-1000
11.233.
PILOT DIRECTIONAL CONTROL PEDAL AND PEDAL SKIRT
REMOVAL/INSTALLATION – continued
b. Install pedal (7) on skirt (8).
(1) Install spacer (13) and bearing (12) in pedal
(7).
(2) Position pedal (7) on skirt (8).
(3) Install bolt (14) through skirt (8) and pedal (7).
(4) Install washer (11) and nut (10). Use hinged
handle.
(5) Tighten nut (10) to aline cotter pin holes.
(6) Install new cotter pin (9).
c. Install rod end (1) on clevis (2).
(1) Position rod end (1) in clevis (2).
(2) Install bushing (6) in clevis (2).
(3) Install bolt (5) through bushing (6) from in-
board side.
(4) Install nut (4).
(5) Tighten nut (4) to aline cotter pin holes.
(6) Install new cotter pin (3).
d. Inspect (QA).
e. Perform flight control system maintenance
operational check (TM 1-1520-238-T).
END OF TASK
M04-3597-4
10
9
11
7
12
13
14
10
9
12
13
LEFT PEDAL
RIGHT PEDAL
14
11
7
8
8
M04-3597-5
3
4
2
5
1
6
