TM 1-1520-238-23
11-1003
11.234.
PILOT DIRECTIONAL CONTROL PEDAL PIVOT SUPPORT ASSEMBLY
REMOVAL/INSTALLATION – continued
11.234.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
b. Remove sealing compound from covers (para
1.47).
11.234.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.232).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.232).
d. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
11.234.6. Installation
a. Install support (8) on crank (13). Torque nut
(15) 180 to 300 INCH-POUNDS.
(1) Aline support (8) with crank (13).
(2) Install bolt (16) through crank (13) and sup-
port (8).
(3) Check fit of self-retaining bolt (16) (para
11.1).
(4) Install nut (15). Torque nut (15) to 180 INCH-
POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 300 INCH-POUNDS.
(6) Install new cotter pin (14).
GO TO NEXT PAGE
VIEW ROTATED
15
14
8
16
13
M04-4425-6
