TM 1-1520-238-23
11-1065
11.254.
DIRECTIONAL F.S. 275 BELLCRANK REMOVAL/INSTALLATION – continued
b. Remove aft push-pull rod (7) from bellcrank
(2).
(1) Remove and discard cotter pin (8).
(2) Remove self-locking nut (9) from close toler-
ance bolt (10).
(3) Remove bolt (10) and bushing (11) from bell-
crank (2) and rod (7).
(4) Remove rod (7).
c. Remove bellcrank (2) from bracket (12).
(1) Remove and discard cotter pins (13) and
(14).
(2) Remove self-locking nut (15) from close toler-
ance bolt (16).
(3) Remove self-locking nut (17) from close toler-
ance bolt (18).
(4) Remove two bolts (16) and (18) from bell-
crank (2) and bracket (12).
(5) Remove bellcrank (2).
11.254.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.254.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.232).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.232).
d. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
GO TO NEXT PAGE
7
2
10
9
8
11
M04-1790-3
16
2
12
15
13
17
14
M04-1790-4
18
