TM 1-1520-238-23
11-1066
11.254.
DIRECTIONAL F.S. 275 BELLCRANK REMOVAL/INSTALLATION – continued
11.254.6. Installation
CAUTION
To prevent damage to flight control sys-
tem components, do not use force to
aline bellcrank with bracket or to aline
push-pull rod with bellcrank.
a. Install bellcrank (2) on bracket (12). Torque
nuts (15) and (17) 30 to 40 INCH-POUNDS.
(1) Aline bellcrank (2) with bracket (12).
(2) Install bolt (16) through bracket (12) and bell-
crank (2).
(3) Install bolt (18) through bracket (12) and bell-
crank (2).
(4) Check fit of self-retaining bolts (16) and (18)
(para 11.1).
(5) Install nuts (15) and (17). Torque nuts (15)
and (17) to 30 INCH-POUNDS. Use torque
wrench.
(6) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(7) Install two new cotter pins (13) and (14).
GO TO NEXT PAGE
16
2
12
15
13
17
14
M04-1790-5
18
