TAIL ROTOR SWASHPLATE CONTROL BELLCRANK INSTALLATION continued

TAIL ROTOR SWASHPLATE CONTROL BELLCRANK INSTALLATION continued - TM-1-1520-238-23-7-2_295

TAIL ROTOR SWASHPLATE CONTROL BELLCRANK INSTALLATION continued - TM-1-1520-238-23-7-2_297

TM-1-1520-238-23-7-2 Helicopter Attack AH-64A Apache (NSN 1520-01-106-9519) (EIC: RHA) Manual
Page Navigation
269

TM 1-1520-238-23 Change 3 11-1115 11.264. TAIL ROTOR SWASHPLATE CONTROL BELLCRANK INSTALLATION – continued c. Install aft side of bellcrank (2) on swashplate (5). Torque nut (14) 65 to 85 INCH-POUNDS. (1) Install bushing (15) in swashplate (5). (2) Check fit of self-retaining bolt (16) (para 11.1). (3) Apply primer to bolt (16). Use primer coating (item 147, App F). (a) Do not apply primer on threads. (b) Install wet. (4) Install bolt (16) through washer (17), bracket (18), bushing (15), swashplate (5), and bell- crank (2). (5) Install nut (14). Torque nut (14) to 65 INCH- POUNDS. Use torque wrench. (6) Increase torque to aline cotter pin hole, but do not exceed 85 INCH-POUNDS. (6) Install new cotter pin (19). (8) Apply adhesive to bolt (16) and nut (14). Use adhesive (item 7, App F). GO TO NEXT PAGE M04-1757-6A 15 14 19 2 5 18 17 16

Privacy Statement
Press Release
Contact