TM 1-1520-238-23
11-1120
11.265.
TAIL ROTOR BELLCRANK LINK REMOVAL/INSTALLATION – continued
11.265.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.232).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.232).
d. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
e. Check bearing for binding or wear.
(1) Maximum allowable radial play is 0.011
INCH.
(2) Maximum allowable axial play is 0.020 INCH.
11.265.6. Repair
a. Replace worn bearings (para 11.4).
11.265.7. Installation
a. Install two roller pins (11) on link (3).
(1) Slide bearing (16) and roller (15) on pin (13).
(2) Hold pin (13). Install washer (14) and nut
(10).
(3) Install pin (13) on link (3) with roller (15) away
from self-alining bearing (17).
(4) Hold pin (13). Install washer (12) and nut (9).
(5) Apply sealing compound to two nuts (10) and
two nuts (9). Use sealing compound
(item 178, App F).
GO TO NEXT PAGE
17
3
11
14
10
912
13
15
16
M04 1758 10
