TM 1-1520-238-23
11-1130
11.267. DIRECTIONAL F.S. 520 BELLCRANK REMOVAL/INSTALLATION – continued
c. Install rod (9) on bellcrank (4). Torque nut (7) 30
to 40 INCH-POUNDS.
(1) Aline rod (9) with bellcrank (4).
(2) Install bushing (11).
(3) Install bolt (8) through bushing (11), bellcrank
(4), and rod (9).
(4) Check fit of self-retaining bolt (8) (para 11.1).
(5) Install nut (7). Torque nut (7) to 30 INCH-
POUNDS. Use torque wrench.
(6) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(7) Install new cotter pin (10).
NOTE
Do not apply sealing compound to spheri-
cal bearing.
(8) Apply sealing compound to head of bolt (8)
and nut (7). Use sealing compound
(item 178, App F).
GO TO NEXT PAGE
10
7
9
8
11
4
M04-1770-8
