TM 1-1520-238-23
11-1127
11.267.
DIRECTIONAL F.S. 520 BELLCRANK REMOVAL/INSTALLATION – continued
11.267.3. Removal
a. Remove sealing compound from nut (1) and
bolt (2).
b. Remove lower push-pull rod (3) from bell-
crank (4).
(1) Remove and discard cotter pin (5).
(2) Remove nut (1).
(3) Remove bolt (2) and bushing (6).
c. Remove sealing compound from nut (7) and
bolt (8).
d. Remove upper push-pull rod (9) from bell-
crank (4).
(1) Remove and discard cotter pin (10).
(2) Remove nut (7).
(3) Remove bolt (8) and bushing (11).
e. Remove sealing compound from two nuts (12)
and bolts (13).
f. Remove bellcrank (4) from bracket (14).
(1) Remove and discard two cotter pins (15).
(2) Remove two nuts (12).
(3) Remove two bolts (13) and bushings (16)
from bellcrank (4).
(4) Remove bellcrank (4).
g. Remove bearing (17) from bracket (14).
GO TO NEXT PAGE
M04-1770-2
M04-1770-3
5
4
6
2
3
1
10
7
9
8
11
4
M04-1770-4
17
14
M04-1770-5
15
13
12
13
15
4
16
16
12
