TM 1-1520-238-23
11-1136
11.269.
DIRECTIONAL F.S. 520 PUSH-PULL ROD REMOVAL/INSTALLATION – continued
11.269.3. Removal
a. Remove sealing compound from nut (1) and
bolt (2).
b. Remove push-pull rod (3) from lower bell-
crank (4).
(1) Remove and discard cotter pin (5).
(2) Remove nut (1).
(3) Remove bolt (2) and bushing (6).
c. Remove sealing compound from nut (7) and
bolt (8).
d. Remove rod (3) from upper bellcrank (9).
(1) Remove and discard cotter pin (10).
(2) Remove nut (7).
(3) Remove bolt (8).
(4) Remove rod (3).
11.269.4. Cleaning
a. Clean removed and attaching parts (para
1.47).
11.269.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.232).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.232).
d. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
GO TO NEXT PAGE
M04-1760-2
6
5
1
3
2
4
M04-1760-3
9
7
10
8
3
