TM 1-1520-238-23
11-1140
11.270.
DIRECTIONAL F.S. 534 BELLCRANK REMOVAL/INSTALLATION – continued
c. Remove sealing compound from nut (6) and
bolt (7).
d. Remove upper push-pull rod (8).
(1) Remove and discard cotter pin (9).
(2) Remove nut (6).
(3) Remove bolt (7) from bellcrank (5) and rod
(8).
e. Remove sealing compound from nut (10) and
bolt (11).
f. Remove bellcrank (5) from bracket (12).
(1) Remove and discard cotter pin (13).
(2) Remove nut (10).
(3) Remove bolt (11) from bellcrank (5) and
bracket (12).
11.270.4. Cleaning
a. Clean removed and attaching parts (para
1.47).
11.270.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.232).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.232).
d. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
GO TO NEXT PAGE
M04-1774-3
9
6
8
7
5
M04-1774-4
10
13
12
5
11
