TM 1-1520-238-23
11-1152
Change 3
11.272. DIRECTIONAL F.S. 542 BELLCRANK REMOVAL/INSTALLATION – continued
b. Install rod (9) on bellcrank (4). Torque nut (8) 30
to 40 INCH-POUNDS.
(1) Aline rod (9) with bellcrank (4).
(2) Install bolt (7) through washer (11), bellcrank
(4), and rod (9).
(3) Check fit of self-retaining bolt (7) (para 11.1).
(4) Install nut (8). Torque nut (8) to 30 INCH-
POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(6) Install new cotter pin (10).
NOTE
Do not apply sealing compound to spheri-
cal bearing.
(7) Apply sealing compound to head of bolt (7)
and nut (8). Use sealing compound
(item 178, App F).
GO TO NEXT PAGE
M04-1772-6A
4
9
10
8
7
11
