TM 1-1520-238-23
12-13
12.4.
PILOT WINDSHIELD WIPER LINK REPLACEMENT - continued
b. Install link (1) on stud (5).
(1) Position link (1) on stud (5).
(2) Install new cotter pin (6).
c. Install link (1) on stud (2).
(1) Position link (1) on stud (2).
(2) Install washer (4) and nut (3).
d. Check for 0.50 INCH clearance between edge
of blade (9) and canopy frame (10).
(1) Adjust rod end (7) to obtain 0.50 INCH clear-
ance between upper and lower edges of
blade (9) and canopy frame (10).
e. Inspect (QA).
f. Perform windshield wipers maintenance op-
erational check (TM 1-1520-238-T).
END OF TASK
M04-956-5
5
6
1
2
3
7
4
1
M04-956-6
M04-956-7
10
9
0.50 IN
