TM 1-1520-238-23
12-16
12.5.
PILOT WINDSHIELD WIPER CONVERTER REPLACEMENT - continued
12.5.6. Installation
NOTE
To ensure proper installation of flex shaft,
coupling must be installed between flex
shaft and converter fitting.
a. Install flex shaft (6) on new converter (1).
Torque nut (7) to 100 INCH-POUNDS.
(1) Remove protective cap (9) from nut (7).
(2) Install coupling (8) and nut (7) on converter
(1).
(3) Torque nut (7) to 100 INCH-POUNDS. Use
torque wrench.
(4) Lockwire nut (7) to converter (1). Use wire
(item 229, App F).
b. Install converter (1) on canopy crossbeam (2).
(1) Position converter (1) on crossbeam (2).
(2) Install three bolts (3) through washers (4),
converter (1), and spacers (5).
(3) Lockwire three bolts (3) together. Use wire
(item 229, App F).
GO TO NEXT PAGE
M04-960-4
8
6
9
7
3
4
2
5
1
