TM 1-1520-238-23
12-156
Change 1
12.50.
PILOT ANTI-ICE PANEL RECEPTACLE REPLACEMENT - continued
12.50.3. Removal
a. Remove backshell (1) from receptacle
(A135)J1 (2).
(1) Remove backshell (1).
(2) Slide backshell (1) over wires (3) so back of
receptacle (2) is accessible.
b. Remove receptacle (2) from connector brack-
et (4).
(1) Remove four screws (5), washers (6), and
nuts (7).
c. Identify and depin wires (3) from receptacle
(2) (TM 55-1500-323-24).
d. Remove and discard receptacle (2).
NOTE
To remove connector bracket or posts, go
to step e. If removal not required, go to
paragraph 12.50.4.
e. Remove bracket (4) from three posts (8).
(1) Remove three screws (9), lockwashers (10),
and washers (11) from posts (8).
(2) Remove bracket (4).
GO TO NEXT PAGE
3
5
2
4
1
M04-1839-2
11
10
9
8
7
6
