TM 1-1520-238-23
12-292
12.67.
WINDSHIELD ANTI-ICE TEMPERATURE CONTROL BOX ACCESS COVER
REMOVAL/INSTALLATION (AVIM) - continued
12.67.4. Cleaning
a. Clean removed and attaching parts (para
1.47).
12.67.5. Inspection
a. Check removed and attaching parts for dam-
age (para 12.46).
b. Check removed and attaching parts for corro-
sion (para 1.49).
12.67.6. Installation
NOTE
If cover was removed to facilitate other
maintenance, go to step c.
a. Install current transformer (11) on new access
cover (1).
(1) Position transformer (11) on cover (1).
(2) Run wire (19) through slotted washer (15).
(3) Install screw (17) through washer (16), cover
(1), slotted washer (15), transformer (11),
slotted washer (18), plastic washer (14),
washer (13), and nut (12).
CAUTION
Ensure that wire (19) running through
center of slotted washer (18) and trans-
former (11) is not pinched after tightening
assembly.
b. Install receptacles (A48)J1 (5) and (A48)J2 (6)
on cover (1).
(1) Position receptacles (A48)J1 (5) and (A48)J2
(6) on cover (1).
(2) Install eight screws (10) through washers (9),
cover (1), receptacles (5) and (6), washers
(8), and nuts (7).
GO TO NEXT PAGE
M04-3777-3
1
10
9
6
5
9
10
7
8
7
8
15
16
17
18
14
13
12
11
19
