TM 1-1520-238-23
13-113
13.35.
ECS PANEL LIGHT INDICATING PANEL REMOVAL/INSTALLATION - continued
b. Remove knob (1) from variable resistor shaft
(2).
(1) Loosen two screws (3).
(2) Remove knob (1).
c. Remove indicating panel (4) from support
panel (5).
(1) Remove three screws (6).
(2) Remove panel (4).
13.35.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
13.35.5. Inspection
a. Check panel for nicks, dents, or cracks (para
13.1).
b. Check removed and attaching parts for corro-
sion (para 1.49).
13.35.6. Installation
a. Install panel (4) on panel (5).
(1) Position panel (4) on panel (5).
(2) Install three screws (6).
b. Install knob (1) on shaft (2).
(1) Tighten two screws (3).
c. Inspect (QA).
d. Perform pilot edge-lights maintenance opera-
tional check (TM 1-1520-238-T).
END OF TASK
M04-3674-2
6
1
3
6
6
4
5
2
