TM 1-1520-238-23
13-115
13.36.
ECS PANEL RESISTOR ASSEMBLY REMOVAL/INSTALLATION (AVIM) - continued
WARNING
Soldering gun can cause severe burns
to personnel and start fires. Observe
all safety precautions when using
soldering gun. If injury occurs, seek
medical aid.
13.36.3. Removal
a. Desolder wires (1) from resistor assembly (2).
(1) Identify and desolder wires (1) from terminals
(3). Use soldering gun (TM 55-1500-323-24).
b. Remove resistor assembly (2) from three
posts (4).
(1) Remove three screws (5), lockwashers (6),
and washers (7) from resistor assembly (2).
(2) Remove resistor assembly (2).
13.36.4. Cleaning
a. Clean removed and attaching parts (para
1.47).
13.36.5. Inspection
a. Check switches for cracks, loose terminals,
and signs of overheating (para 13.1).
b. Check removed and attaching parts for corro-
sion (para 1.49).
GO TO NEXT PAGE
M04-3675-2
2
1
5
6
7
4
3
3
1
