TM 1-1520-238-23
15-133
15.35.
APU AFT FITTING REMOVAL/INSTALLATION - continued
15.35.6. Installation
NOTE
Place shims equally at four places on
each side of fitting to provide a maximum
gap of 0.002 INCH.
a. Install fitting (1) on support (2).
(1) Position fitting (1) on support (2).
(2) Install shims (6) between fitting (1) and sup-
port (2) as necessary.
(3) Install two screws (3) through fitting (1) and
support (2).
(4) Install two washers (5) and nuts (4) on screws
(3).
b. Inspect (QA).
c. Install aft support strut (para 15.31).
d. Install APU (para 15.3).
END OF TASK
2
6
6
5
4
1
M04-2170-2
3
