TM 1-1520-238-MTF
Change 3
2-58
PROCEDURE
TROUBLESHOOTING
REFERENCE
STARTING ENGINES – PILOT (CONT)
NOTE
Use the procedures in steps 9.a. thru 9.i. for
COLD and WARM
engine starts and for
COLD
engine starts (more than 4
hours since last shutdown) and all IN-
FLIGHT
and
engine starts. Use the
procedures in steps 9.j. thru 9.(4) for WARM
engine starts on the GROUND.
b. START switch – START.
NOTE
During engine start the amber X FEED cau-
tion/warning lights will illuminate if the
CROSSFEED switch is not in the AFT TK
position (modified caution/warning panels).
c. Instruments – Monitor.
d. PWR lever – IDLE after NG speed
increases and TGT is below 150 C
.
e. Clock – Start.
f. Engine oil pressure – Verify
increasing within 45 seconds after
moving PWR lever to IDLE.
