“FOD REMINDER”
Check work area for tools and parts after completion of maintenance and inspection
TM 1-1520-238-PMS
C 1
21
Seq.
No.
Location
Item and Procedure
ENGINE NACELLE – RIGHT
POWER OFF
2.11
–––
ENGINE (work platform door RN1 opened)
24
Interior panels and structure for cracks, distortion, and cleanliness
Loose or missing hardware
Engine components for physical damage and mounting security
Power turbine, combustion chamber, compressor housing, exhaust nozzles, and IR suppressors for cracks, dents,
and burned or buckled areas
FUEL AND LUBE OIL LINES FOR LEAKAGE AND CHAFING
Visible flex cables for kinking, proper routing, and clamping security
25
ENGINE MOUNTS, PINS, AND BUSHINGS FOR CRACKS AND SECURITY
26
Deleted
27
Deleted
28
Deleted
29
Engine lube oil filler cap for leakage and full closure
30
Starter lube oil filler for proper oil level (to lip of filler neck) and for leakage and full cap closure
31
Overspeed and drain valve for leakage and connection security
32
Hydromechanical control unit (HMU) for leakage and connection security
33
Boost pump for leakage and connection security
34
FIRE DETECTION SENSORS FOR DAMAGED LENS AND MOUNTING SECURITY
Clean lenses with tissue
Visible wiring for chafing or damaged insulation and connection security
35
Engine turbine case for loose or broken third stage nozzle bolts
Perform engine THIR inspection (TM 55-2840-248-23)
36
Engine cooling louvers for missing, flaked, or chipped paint
