TM 1–1520–238–T–1
4–88.8
Change 5
4–12A STAB – INTERACTIVE FD/LS CHECK 4–12A
(ACZ) (cont)
TASK
RESULT
NOTE
When acknowledged, the stabilator is
automatically driven to –15 degrees down after
stabilator has reached its full up position in
response to testing commands.
t. On DEK, press and
release ENTER
SPACE key (ADC);
or on the CDU, SPC
KEY (ADD).
If NO–GOs appear on VDU,
stop FD/LS testing and
perform CORRECTIVE
ACTION.
When PUSH COLL TO FULL
DOWN appears on HOD, go
to next step.
u. Push the pilot
collective stick to the
full down position.
If NO–GOs appear on VDU,
stop FD/LS testing and
perform CORRECTIVE
ACTION.
When PLACE ROTOR
BRAKE SWITCH TO
DESIRED POSITION ACK
VIA KBD appears on VDU,
go to next step.
v. On pilot power lever
quadrant, set RTR
BK switch to OFF.
w. On DEK, press and
release ENTER
SPACE key (ADC);
or on the CDU, SPC
KEY (ADD).
When AUTO STABILATOR
SYSTEM GO ANY KEY FOR
FDLS MENUS appears on
HOD and VDU, go to next
step.
