TM 1-1520-238-T-6
9–379
9–149. PILOT CIRCUIT BREAKER PANEL – REMOVAL/INSTALLATION (cont)
9–149
CAUTION
Remove two aft screws first, then
support forward end of panel while
removing remaining two screws to
prevent damage to transparent barrier or
pilot glareshield.
c. Remove circuit breaker panel (6). Remove
screws (10).
d. Remove back cover (11) from panel (6).
Remove nuts (12) and washers (13) from
studs (14) and screws (15) as required.
2. Installation
a. Install back cover (11) on panel (6).
(1) Position cover (11) over studs (14).
(2) Install washers (13) and nuts (12)
on studs (14) install screws (15) as
required.
b. Fasten pilot circuit breaker panel (6) to
mounting bracket. Install screws (10).
10
6
M69-201-3
15
6
11
14
13
12
M69-201-4
10
6
M69-201-5
