TM 1-1520-238-T-7
10–189
10–67. NITROGEN INERTING SYSTEM – MAINTENANCE OPERATIONAL CHECK
10–67
Tools:
Nomenclature
Part Number
Tool Kit, Aircraft
SC518099CLA01
Mechanic’s
Personnel Required:
67R
Attack Helicopter Repairer
One person to assist
References:
TM 1-1520-238-T-4
TM 1-1520-238-23
Equipment Conditions:
Ref
Condition
TM 1-1520-238-23
Access provisions –
R200 access panel and
R295 access door open
Paragraph 10–10
FUEL SYSTEM – POWER
UP completed
Paragraph 10–12
FUEL SYSTEM – VISUAL
CHECK completed
TM 1-1520-238-T-4
Maintenance headset
connected
WARNING
Make certain that helicopter safing procedures are accomplished.
Observe all safety precautions during troubleshooting or maintenance
procedures. Failure to do so could result in death or serious injury.
Jet engine fuel is explosive, flammable, and toxic to skin, eyes, and
respiratory tract. Work in a well-ventilated area away from open flames.
Wear protective clothing. If fuel comes in contact with eyes or skin, flush
with water and get medical aid.
Do not allow sparks or flame near helicopter when servicing or
performing maintenance on fuel system.
Make certain helicopter is grounded.
NOTE
Refer to NIU loaction (fig. 10–71) for helicopter configuration and
equipment.
If referenced out of one paragraph or volume and into another for
additional troubleshooting, upon completion of the task, return to the
maintenance operational check for the original paragraph or volume.
