TM 1-1520-238-T-7
11–175
11–23. DASE– MAINTENANCE OPERATIONAL CHECK (cont)
11–23
Task
Result
h. On pilot ASE panel (fig. 11–109), set
PITCH, ROLL, YAW and ATTD/HOVER
HOLD switches to on.
i. On CPG cyclic stick (fig. 11–112), press
ASE release switch. Check that PITCH,
ROLL, YAW and ATTD/HOVER HOLD
switches move to OFF.
If PITCH, ROLL, YAW and ATTD/HOVER HOLD
switches remain in the on position, go to
paragraph 11–42.
M70-187
ASE RELEASE
SWITCH
TRIM FEEL
RELEASE SWITCH
Figure 11–112.
CPG Cyclic Stick
j. On pilot HARS control panel (fig. 11–108),
set ALIGN switch to NORM.
NOTE
For a helicopter with BUCS deactivated, omit steps k. thru v.
k. On pilot power quadrant (fig. 11–113), set
RTR BK switch to BRAKE and set power
levers to OFF.
l. On pilot center circuit breaker panel
(fig. 11–107), check that RTR BRK circuit
breaker is closed and remains closed.
If RTR BRK circuit breaker does not stay closed, go
to paragraph 7–33.
m. On CPG collective stick (fig. 11–104), swing
guard down and hold BUCS select trigger
switch closed.
