TM 1-1520-238-T-7
11–173
11–23.
DASE– MAINTENANCE OPERATIONAL CHECK (cont)
11–23
Task
Result
b. On pilot center circuit breaker panel
(fig. 11–107), check that ASE BUCS circuit
breaker is closed and remains closed.
If ASE BUCS circuit breaker does not stay closed, go
to paragraph 11–31.
c. On pilot HARS control panel (fig. 11–108),
set ALIGN switch to OPR.
M70-183
HARS
ALIGN
SWITCH
Figure 11–108.
Pilot HARS Control Panel
NOTE
Center all controls before performing step d.
d. On pilot ASE panel (fig. 11–109), set
PITCH, ROLL, YAW and ATTD/HOVER
HOLD switches to on.
If PITCH, ROLL, YAW and ATTD/HOVER HOLD
switches do not stay on, go to paragraph 11–36.
If PITCH switch does not stay on and ASE indicator is
lighted, go to paragraph 11–37.
If ROLL switch does not stay on and ASE indicator is
lighted, go to paragraph 11–38.
If YAW switch does not stay on and ASE indicator is
lighted, go to paragraph 11–39.
If ATTD/HOVER HOLD switch does not stay on and
ASE indicator is lighted, go to paragraph 11–40.
e. On pilot and CPG caution/warning panels
(fig. 11–110 and fig. 11–111), check that
ASE indicators are not lighted.
If either ASE indicator is lighted, go to
paragraph 11–35.
