TB 1-1500-351-20-1
Receivers to Antenna-Dectors
From
TO FWD LEFT
TO FWD RIGHT
TO AFT LEFT
TO AFT RIGHT
J1 ANT-DET
J1 ANT-DET
J1 RCVR
_________
-------
J1 ANT DET
J1 ANT DET
J2 RCVR
5.
Slide the shrink tubing and crimp ring onto the cable. The hole for the solder on the crimp ring should
be closest to the end of the cable. Then trim the jacket to .700" from the end of the cable and trim the
braids to .440" from the end of the cable; as shown below.
6.
Slide the transfer body over the cable core and under the braid until there is .163 of core showing out
of the front of the transfer body. Than slide the crimp ring over the braids and against the transfer body.
8