TB 1-1520-238-30-19
Figure 11. Gasket Worksheet
CAUTION
Ensure plastic caps are remain installed on both sides of the output
adapter shaft to preclude contamination of roller bearing (20).
10.4.2.3 Calculate dimensions for clutch gaskets (24) as follows: (AB) 0.003= Gasket +/ 0.002 inch.
10.4.2.4 Using 1 inch OD micrometer, select required amount of gaskets (24) and set aside for later
installation (see para 10.9).
10.4.3 Remove annular ball bearing (25) from output housing (26).
18
