TB 1-1520-238-30-19
10.4.4 Lubricate seal (22) with Mobilgrease28.
10.5 If not previously accomplished, install assembled seal plate assembly (23) onto splined output adapter
with (19) anti-rotation pins facing up.
INSPECTION POINT: VERIFY SEAL IS UNDAMAGED AND IS SEATED
TIGHTLY AGAINST THE SPLINED OUTPUT ADAPTER (19) SEALING
SURFACE.
10.6 Align anti-rotation slot on annular ball bearing (25) with pins on seal plate assembly (23).
INSPECTION POINT: INSURE "V" MARK IS ALIGNED ON ANNULAR
BALL BEARING (25) PRIOR TO INSTALLATION ON SPLINED OUTPUT
ADAPTER (19).
CAUTION
Remove plastic caps prior to assembly operations.
10.7 Align match marks on bearing inner diameter and press annular ball bearing (25) onto splined output
adapter (19).
CAUTION
Ensure output adapter (19) is supported at base of shaft prior to
pressing annular ball bearing (25) onto adapter (P/N 298166-2, Figure
splined output adapter (19).
19
