TM 1-1520-238-23
Change 1
3-171
3.47.
TAIL LANDING GEAR WHEEL (WITH GREASE FITTING) TIRE AND TUBE
REMOVAL/INSTALLATION – continued
3.47.3. Removal
WARNING
Do not take wheel apart before de-
flating tire. Pressure on loosened
nuts could cause nuts to break
loose and wheel subassemblies to
separate and injure personnel. If in-
jury occurs, seek medical aid.
Do not remove valve core from
stem boss until all nitrogen is out of
tire. Pressure on loosened core
could cause core to be blown from
stem and injure personnel. If injury
occurs, seek medical aid.
a. Deflate tire (1).
(1) Remove valve cap (2).
(2) Press valve core end (3) to deflate tire (1).
(3) Remove valve core (4) from stem boss (5).
Use tire valve tool.
b. Remove nut (6) and washer (7) from stem
boss (5).
GO TO NEXT PAGE
M04-029-1
1
4
3
2
5
M04-029-2A
5
7
6
