TM 1-1520-238-23
3-174
Change 1
3.47.
TAIL LANDING GEAR WHEEL (WITH GREASE FITTING) TIRE AND TUBE
REMOVAL/INSTALLATION – continued
f. Install nut (6) and washer (7) on stem (5).
Torque nut (6) to 10 INCH-POUNDS.
(1) Install washer (7) over stem (5).
(2) Install nut (6) on stem (5). Torque nut (6) to 10
INCH-POUNDS. Use torque wrench.
g. Install core (4) in stem (5). Use tire valve tool.
WARNING
Wheel and tire must be in safety cage
when tire is being inflated. Tire could
blow off wheel and personnel could be
injured by flying parts. If injury oc-
curs, seek medical aid.
h. Install tire (1) in cage (TM 55-2620-200-24).
Use cage.
i. Inflate tire (1) to 105 5 psi. Use inflator
assembly and nitrogen truck.
NOTE
Allow 30 MINUTES before removing in-
flated tire from safety cage.
j. Remove
tire
(1)
from
cage
(TM 55-2620-200-24).
GO TO NEXT PAGE
M04-0029-5A
5
7
6
M04-0029-6
5
4
M04-0029-8A
5
18
19
1
