TM 1-1520-238-23
Change 1
3-173
3.47.
TAIL LANDING GEAR WHEEL (WITH GREASE FITTING) TIRE AND TUBE
REMOVAL/INSTALLATION – continued
3.47.6. Installation
a. Install tube (14) in tire (1).
(1) Install tube (14) in tire (1).
(2) Aline stem (5) with dot on sidewall of tire (1).
b. Install tire (1) on wheel subassembly (8).
(1) Install tire (1) on wheel subassembly (8).
(2) Aline slot (15) with stem (5).
c. Install wheel subassembly (9) on tire (1).
(1) Install wheel subassembly (9) on tire (1).
(2) Aline stem boss hole (16) with stem (5).
(3) Push wheel (9) on tire (1) until wheels (8) and
(9) touch.
d. Install three bolts (10), washers (13) and (12),
and nuts (11) on wheel subassemblies (8) and
(9). Torque three nuts (11) to 65 INCH-POUNDS.
(1) Coat threads of bolts (10). Use antiseize
compound (item 26, App F).
(2) Install three bolts (10) through washers (13)
and wheel subassembly (8) and (9).
(3) Hold three bolts (10). Install washers (12) and
nuts (11). Torque nuts (11) to 65 INCH-
POUNDS. Use torque wrench.
e. Inspect (QA).
GO TO NEXT PAGE
1
9
M04-0029-4A
12
11
10
13
15
14
8
5
16
