TM 1-1520-238-23
3-187
3.50.
TAIL LANDING GEAR WHEEL (WITHOUT GREASE FITTING) TIRE AND TUBE
REMOVAL/INSTALLATION – continued
WARNING
Wheel and tire must be in safety cage
when tire is being inflated. Tire could
blow off wheel, or personnel could be
injured by flying parts. If injury oc-
curs, seek medical aid.
g. Place tire (1) in cage (15) (TM 55-2620-200-24).
(1) Allow 30 MINUTES before removing inflated
tire from safety cage.
h. Inflate tire (1) to 105 5 psi.
(1) Install hose (16) and chuck (17) on valve
stem (5).
(2) Inflate tire (1) to 105 5 psi. Use inflator
assembly and nitrogen truck.
(3) Shut off inflator assembly.
(4) Remove chuck (17) from stem (5).
i. Remove tire (1) from cage (15).
GO TO NEXT PAGE
M04-3433-5
15
16
5
17
1
