TM 1-1520-238-23
3-229
3.60.
PARKING BRAKE ROTARY DIRECT VALVE REMOVAL/INSTALLATION – continued
c. Remove rotary valve tubes (4) and (5) from
rotary direct valve (6).
(1) Hold piston assembly fittings (7). Remove
tube coupling nuts (8).
(2) Remove tubes (4) and (5) from valve (6).
d. Enter CPG station (para 1.56). Observe all
safety precautions.
e. Remove clevis (9) from lever (10).
(1) Remove and discard cotter pin (11).
(2) Remove straight head pin (12) and two wash-
ers (13).
(3) Remove clevis (9) from lever (10).
f. Remove bracket assembly (14) from console
(3).
(1) Remove four screws (15) and washers (16)
from bracket (14).
(2) Remove bracket (14) from console (3).
NOTE
Bleeder fittings are typical for both sides
of valve.
g. Remove bleeder fittings (17) from valve (6).
(1) Remove four bolts (18), washers (19), and
self-locking nuts (20) from fittings (17).
(2) Remove fittings (17) from valve (6).
GO TO NEXT PAGE
M04-3055-3
6
8
4
8
5
7
M04-3055-4
15
16
3
14
18
19
11
13
12
13
9
10
17
20
M04-3055-5
