TM 1-1520-238-23
2-228
2.67.
PILOT STATION ACCESS DOOR UPPER HINGE BUTT REMOVAL/INSTALLATION – continued
NOTE
Minimum gap between door skin and air-
frame is 0.030 INCH.
c. Trim door skin minimum required to obtain
acceptable gap.
d. Attach new upper hinge (1) to lower hinge half
(16).
(1) Install two hinge pins (12) in hinge halves (1)
and (16).
(2) If lower hinge (16) contacts upper hinge (1)
causing interference, go to paragraph
2.67.7.b.
(3) If interference does not exist, go to step e.
e. With door (10) latched, check for gap between
hinge (1) and bow beam (2).
(1) If gap of 0.020 INCH or less exists, go to step
f.
(2) If gap greater than 0.020 INCH exists, posi-
tion original shim (5) in gap.
(3) If original shim is not available, or does not fill
gap, go to paragraph 2.67.7.a.
GO TO NEXT PAGE
M04-3618-5
2
1
16
12
1
2
16
5
10
12
5
