TM 1-1520-238-23
2-226
2.67.
PILOT STATION ACCESS DOOR UPPER HINGE BUTT REMOVAL/INSTALLATION – continued
2.67.3. Removal
CAUTION
To prevent damage to bow beam and
shim (if installed), use caution when
removing hinge.
To prevent debris from entering pilot
station, mask opening before drilling.
a. Remove upper hinge butt (1) from bow beam
(2).
(1) Remove
four
upper
rivets
(3)
(TM 1-1500-204-23).
(2) Remove
three
lower
rivets
(4)
(TM 1-1500-204-23).
b. Break adhesive seal between hinge (1), shim
(5) (if installed), and bow beam (2). Use putty
knife.
(1) Remove and discard hinge (1). Retain shim
(5) (if installed).
2.67.4. Cleaning
a. Clean adhesive from bow beam (para 1.47).
Buffing may be necessary.
2.67.5. Inspection
a. Check rollover structure for cracks or damage
(para 2.12).
b. Check
rivet
holes
for
elongation
(TM 1-1500-204-23).
c. Touch up paint (TM 55-1500-345-23).
GO TO NEXT PAGE
1
2
M04-3618-2
4
3
1
2
4
3
1
5
2
1
2
M04-3618-3
5
