TM 1-1520-238-23
2-230
2.67.
PILOT STATION ACCESS DOOR UPPER HINGE BUTT REMOVAL/INSTALLATION continued
2.67.7. Repair
a. Make new shim (5) to eliminate gap between
upper hinge (1) and bow beam (2).
(1) Make shim (5) as shown, thickness deter-
mined by 2.67.6.e. Use 2024T3 aluminum.
(2) Roll form shim (5) to match contour of hinge
(1).
(3) Taper shim (5) as required to fill gap.
(4) Apply
chemical
film
solution
(TM 55-1500-345-23).
(5) Touch up paint (TM 55-1500-345-23).
(6) Go to paragraph 2.67.6.f.
b. Relieve interference between hinge halves (1)
and (16) and bow beam (2).
(1) Mill inboard surface of hinge (16) 0.030 INCH
maximum (TM 1-1500-204-23).
(2) Touch up paint (TM 55-1500-345-23).
(3) Go to paragraph 2.67.6.e.
GO TO NEXT PAGE
0.31 IN
RADIUS (2 PLACES)
0.032 TO 0.100 IN
THICK AS REQUIRED
5
4.20IN
1.65 IN
0.20 IN
M04-1318-8
AREA OF
INTERFERENCE
16
2
1
M04-3618-11