TM 1-1520-238-23
2-243
2.70.
LEFT FORWARD CANOPY WINDSHIELD PANEL ASSEMBLY
REMOVAL/INSTALLATION – continued
c. Install fixed canopy (6) and panel (5) in frame
(7).
(1) With one person to assist, position and hold
panel assembly (12) in frame (7).
(2) Install six screws (8) with washers (9) in loca-
tions shown in illustration. Do not tighten.
(3) Install 75 washers (9) and screws (8) in group
sequence 1 thru 15 shown in illustration. Do
not tighten.
(4) Tighten six screws (8) in sequence a, b, c, d,
e, and f shown in illustration, until screws (8)
are snug against washers (9).
(5) Tighten 75 screws (8) in group sequence 1
thru 15 shown in illustration, until screws (8)
are snug against washers (9) and panel (12)
is in complete contact with frame (7).
d. Torque six screws (8) to 5 INCH-POUNDS in
sequence a, b, c, d, e, and f shown in illustra-
tion. Use torque wrench.
e. Torque 75 screws (8) another 5 INCH-POUNDS
in group sequence 1 thru 15 shown in illustra-
tion. Use torque wrench.
f. Seal around panel (5). Use sealing compound
(item 176, App F) and sealant gun.
GO TO NEXT PAGE
8
1
12
7
14
3
4
13
10
11
6
9
2
5
15
M04-1448-8
9
8
f
7
c
a
e
d
b
12
6
9
8
5
SMALL CIRCLED LETTERS SHOW TORQUING ORDER
SEQUENCE CHART
