TM 1-1520-238-23
2-248
2.71.
LEFT AFT CANOPY WINDSHIELD PANEL ASSEMBLY REMOVAL/INSTALLATION – continued
2.71.6. Installation
a. Apply 1/8 INCH bead of adhesive around win-
dow cavity (11). Use adhesive (item 14, App F).
b. Install seal (10) in window cavity (11) (para
2.52).
c. Install severance assembly (6) and panel (5) in
frame (7).
(1) With one person to assist, position and hold
panel assembly (12) in frame (7).
(2) Install five washers (9) and screws (8) in loca-
tions shown in illustration. Do not tighten.
(3) Install 62 washers (9) and screws (8) in group
sequence 1 thru 10 shown in illustration. Do
not tighten.
(4) Tighten five alinement screws (8) in locations
shown in illustration, until screws (8) are snug
against washers (9).
(5) Tighten 62 screws (8) in group sequence 1
thru 10 shown in illustration, until screws (8)
are snug against washers (9) and panel (12)
is in complete contact with frame (7).
d. Torque five screws (8) to 5 INCH-POUNDS in
locations shown in illustration. Use torque
wrench.
e. Torque 62 screws (8) to 5 INCH-POUNDS in
group sequence 1 thru 10 shown in illustra-
tion. Use torque wrench.
f. Seal around panel (5). Use sealing compound
(item 176, App F) and sealant gun.
GO TO NEXT PAGE
M04-1452-6
10
11
2
7
10
5
3
8
1
6
4
9
M04-1452-7
5
7
8
9
12
8
9
6
