TM 1-1520-238-23
2-249
2.71.
LEFT AFT CANOPY WINDSHIELD PANEL ASSEMBLY REMOVAL/INSTALLATION – continued
g. Enter CPG station (para 1.56). Observe all
safety precautions.
WARNING
Severance assembly is an explosive
device. Do not remove canopy jettison
handle safety pin or move jettison
handle. Detonation may cause severe
injury to personnel. If injury occurs,
seek medical aid.
CAUTION
Install detonating cord with care. Do not
twist cord or damage booster cup on end
of cord. Damage to cord or cup may
affect performance of severance assem-
bly.
h. Install cord (1) in severance device (2). Torque
fitting (3) to 80 INCH-POUNDS.
(1) Install new packing (4) on nipple (3).
(2) Install nipple (3) in severance device (2).
(3) Hold severance device (2). Torque fitting (3)
to 80 INCH-POUNDS. Use torque wrench.
(4) Lockwire nipple (3) to severance device (2).
Use wire (item 226, App F).
i. Inspect (QA).
j. Install wire strike protection aircraft cable cut-
ter (para 2.193).
k. Install bow beam handle (para 2.49).
END OF TASK
2
3
1
M04-1452-5
4
