TM 1-1520-238-23
2-258
2.73.
UPPER CENTER CANOPY WINDSHIELD PANEL REMOVAL/INSTALLATION – continued
b. Install bar (7) on windshield (8). Torque 29
screws (9) to 20 INCH-POUNDS.
(1) Position bar (7) on windshield (8).
(2) Apply sealing compound to threads of 29
screws (9). Use sealing compound (item 177,
App F) and sealant gun.
(3) Install 29 screws (9) and washers (10) in bar
(7) while sealing compound is still wet.
(4) Torque 29 screws (9) to 20 INCH-POUNDS.
Use torque wrench.
(5) Apply a 0.125 INCH bead of sealing com-
pound on bottom forward and aft mating sur-
faces of windshield (8) and bar (7). Use
sealing compound (item 177, App F) and
sealant gun.
c. Seal around bar (7) and windshield (8). Use
sealing compound (item 176, App F) and sealant
gun.
d. Attach four wires (1) to studs (2).
(1) Install four studs (2) on block (3).
(2) Attach wire H70C16 (1) to stud P1 (2).
(3) Attach wire H70B16 (1) to stud P3 (2).
(4) Attach wire H73A24 (1) to stud S3 (2).
(5) Attach wire H74A24 (1) to stud S4 (2).
GO TO NEXT PAGE
M04-1446-9
10
7
9
8
S4
S3
S2
S1
P3
P1
2
1
3
M04-1446-10
