TM 1-1520-238-23
2-261
2.74.
UPPER AFT CANOPY WINDSHIELD PANEL REMOVAL/INSTALLATION – continued
c. Clean protective latex coating from replace-
ment panel if it does not peel off cleanly. Use
isopropyl alcohol (item 106, App F) and cloth
(item 48, App F).
2.74.5. Inspection
a. Check frame for cracks and corrosion (para
2.12).
b. Check panel for cracks, pitting, and scratches
(para 2.12).
2.74.6. Installation
a. Install panel (1) on frame (2).
(1) Apply a 0.125 INCH bead of sealing com-
pound around mating surfaces of frame (2).
Use sealing compound (item 177, App F).
(2) Position panel (1) on frame (2).
(3) Install 53 screws (3) through washers (4) until
screws (3) are snug against washers (4) and
panel (1) is in complete contact with frame
(2).
b. Torque 53 screws (3) to 5 INCH-POUNDS. Use
torque wrench.
c. Seal around panel (1). Use sealing compound
(item 176, App F) and sealant gun.
d. Inspect (QA).
END OF TASK
M04-1456-3
1
2
3
4
