TM 1-1520-238-23
2-274.4
Change 3
2.77A.
MAIN LANDING GEAR SHOCK STRUT STRUCTURAL SUPPORT PIN REPLACEMENT continued
2.77A.3. Removal
WARNING
Do not place heater near flammable
material or allow heater to contact
skin: severe burns can result. Wear
protective equipment. If injury occurs,
seek medical aid.
a. Remove guide pins (1) from strut support (2).
(1) Apply heat to guide pins (1). Use heater.
(2) Remove and discard guide pins (1) from sup-
port (2).
2.77A.4. Cleaning
a. Clean guide pin attaching surfaces (para 1.47).
2.77A.5. Inspection
a. Check support and angle for corrosion (para
1.49).
WARNING
If support is cracked, replace attach-
ing bolts.
b. Check support and angle for bends and/or
cracks (para 2.12).
GO TO NEXT PAGE
M04-5137-2
1
2
RIGHT HAND SHOWN