TM 1-1520-238-23
2-334
Change 6
2.92.
LEFT FORWARD SIDE TRANSMISSION ROTOR SUPPORT STRUT ASSEMBLY
REMOVAL/INSTALLATION – continued
2.92.6. Installation
a. Install strut (2) on strut (26). Torque two nuts
(28) to 600 INCH-POUNDS.
(1) Install two bolts (27) in struts (2) and (26).
(2) Hold two bolts (27). Install washers (29) and
nuts (28). Use ratchet.
(3) Torque two nuts (28) to 600 INCH-POUNDS.
Use torque wrench and adapter.
(4) Check for maximum gap of 0.050 INCH under
washer (29) at bolt (27) head and nut (28)
side. Replace bolt (27) if gap exceeds 0.050
INCH.
b. Install line (23) on manifold (24).
(1) Slide line (23) up through hole in deck.
(2) Install nut (25) on manifold (24).
GO TO NEXT PAGE
M04-1468-7
26
29
28
27
2
M04-1468-10
232524
